WELCOME to ADAST-Midwest

The "ADAST MAXIMA MS 62 PH" paper cutter is the first product from a new range hydraulic guillotines featuring an advanced overall design concept for increased efficiency of critical components. For example, the power transmission for the cutting mechanism is via a linear hydraulic motor.
The machine is designed for cutting paper stacks of up to 620 mm wide and 95 mm high. The robust construction of the ADAST MAXIMA MS 62 PH, however, facilitates a wide variety of cutting applications, including paper, card, board, rubber, cork and similar materials up to a strength of 45 N/mm over the full cutting length.
It is ideally suited for small commercial print houses, copy centers, in-plant printing departments, digital printers or large offices, but can also be satisfactorily deployed in the processing of rubber, veneer, metal or plastic foils, etc.

• SAFETY FEATURES:
• Infrared light barrier guard.
• Positive mechanical locking of the knifebeam in the top rest position with cross-monitoring.
• Automatic return of the knife from any position.
• Twin push-button control of the cutting cycle with timed synchronization (0.5 seconds max.).
• 24 V control circuits for clamp and knife operation, backgauge drive and lighting.
• Fixed guarding to all danger areas.
• Constant shielding of the knife by the clamp in every position.
• Low pressure pre-clamping/gauging system.
• Rear table without lead-screw slot for Backgauge drive.
• Fully compliant with European "CE" safety requirements.

• Hydraulic clamping and cutting operation with adjustable pressure control.
• Backgauge drive via lead screw located adjacent to the right-hand side of rear table.
• New design concept of the cutting mechanism.
• Smooth, vibration free cutting.
• High precision.
• Quiet operation.
• Overload protection

• Overload protection.
• Simple knife-change.
• Cutting cycle counter.
• Supplied with 2 high quality steel knives.

• Overload protection.
• LSD display with 8 x 40 characters.
• Direct setting of cutting coordinates.
• Coordinate setting by +/- value.
• Measure display in metric (mm) or imperial (").
• Manual control of the Backgauge traverse by electronic push-button in 0.1 mm increments.
• Memory capacity for 50 cutting programs with up to 1000 cutting steps.
• Programming whilst cutting ("cut to mark") facility.
• Easy selection and recall for regularly repeated cutting jobs.
• Strip cutting feature, with or without intermediate cutting.
• Simple program editing.
• Material ejection ("push-out") facility.
• Fast backward and forward drive speeds.

• Overload protection.
• 400V/50 Hz 3 phase.
• Mains isolator switch.
• Thermal overload protection.
• Illuminated work area.
• Optical cut line indication.

• Adjustable clamping pressure for cutting various types of material.
• Removable false clamp plate.

• Simple program editing.
• Air cushion table.
• High-speed steel knife.
• Chromium -plates table surfaces.
• Reciprocating ball bearing lead-screw drive.
• Cutting knives with 16 degrees to 30 degrees bevels.
• Flexible sheet-metal clamp plate.
• Alternative voltage.

Cutting width:     	                       620 mm (24.4")

Knife traverse time during one cut cycle:  1.8 seconds 

Front table length in front of knife:     640 mm (25.2") 
 
Max. backgauge traverse:                  620 mm (24.4")

Minimum cut:	    	                        18 mm (0.7")

Table height from floor:	                 900 mm (35.4")

Maximum pile height (with false clamp):    90 mm (3.54") 

Maximum pile height (without false clamp): 95 mm (3.74") 

Pre-clamping (gauging) pressure:          max. 300 N 

Clamping pressure: 			     2,000 N - 24,000 N

Backgauge speed 	- micro-feed:	      10 mm/sec.
			-  fast-feed:	     130 mm/sec. 
			- continuos up to max:  130 mm/sec. 

Backgauge drive motor (frequency converter) output: 0.55 KW

Max. number of cutting steps per program: 	 20 

Max. number of cutting programs: 		 50

Period of program storage after switch-off (min): 1 year

Measure display resolution:`			0.01mm

Power requirement:                        3 x 400 V/2.8 kW

Gross weight (packed):			 1200 kg (2628 LB)

Net weight:				       1000 kg (2190 LB)

Length/width/height:                 1821 x 1320 x 1490 mm 

The machine is shipped
fully assembled in case:             2050 x 1520 x 1700 mm 



 return to ADAST-Midwest page
Next...